Dynastus Touch Up 5 oz HVLP Air Spray Gun for Auto Car Detail Paint Spot Repair

This Dynastus touch-up spray gun is ideal for small repair work, detailing, and hobbyists. It features a 150cc capacity cup and comes in handy when working with small areas or those tight places that are hard to reach with a larger spray gun. The gun is suitable for spray painting of medium or high-adhesive surfaces for finishing and middle coating. It is one of the most effective car touch-up guns with an incredible operating pressure of about 30-43 PSI, making it suitable for water-soluble paint and a variety of spray paints, dedicated to car repair, quality furniture, and other equipment.

To get the best performance, make sure your compressor meets the following requirements: 3.2 to 5.6 CFM @ 40 PSI, and a 3/4 to 2 Horsepower or tank capacity of at least 6 gallons. The faster you use the painter, the more power you need.

Each time you are getting ready to use your gun, you will need to set it up. Start by taping a piece of masking paper on your wall for your spray test. The built-in 3 ergonomic anodized knobs are perfect for precise control. The air flow adjusting regulator allows you to set and adjust air flow for each specific paint application, ensuring the optimal atomization and cost savings. The air adjustment range is 0 to 140 psi (1 to 10 bar), and the air inlet and outlet are 1/4" NPT.

In the painting process, an effective paint filter is recommended to reduce any small pieces of dried paint or pollutant in the fluids to ensure a perfect finish. Dirt, sand, and dried clumps of paint can ruin spray guns, so never attempt to run unfiltered, dirty paint through a spray gun.

This spray gun features a 5 oz. capacity cup and is ideal for small repair work, detailing, and hobbyists. The stainless steel needles and precision air caps are ideal for a fully atomized and consistent spray pattern for a smooth, professional finish. It requires a minimum 3/4 hp compressor, and the gravity feed action lets fluid flow downward using less air.

The built-in 3 control knobs include: Fluid control, which regulates the amount of paint sprayed; Pattern control, which adjusts the fan pattern size; and an air adjustment valve, which provides versatility to adjust air flow. The gun also includes a handle toothbrush, 1/4 NPT female plug, filter, and respirator, making your spraying work very comfortable and helping you achieve perfect results.

product information: